P1077 - Obd2 code p1077 and the intake manifold. Common symptoms of obd2 code p1077. Recognizing the symptoms associated with p1077 can help you pinpoint the problem. Based on the information you provided, the code p1077 and p1078 refer to a problem with the intake manifold runner control system. As you have already replaced the gasket and runner. The intake manifold runner control system is responsible for adjusting the length of the intake. How do i fix code p1077 honda code? Check the possible causes listed above. Visually inspect the related wiring harness and connectors. The p1077 code is a common trouble code that may indicate a problem with the vehicleโs exhaust gas recirculation (egr) system. This code can be caused by an egr valve that has become. If dtc p1077 is not indicated, replace the imt actuator (see imt actuator replacement ), then go to step 25. If dtc p1077 is indicated, go to step 31. Repair information for p1077 code. Learn what intake manifold runner control system malfunction low rpm means, location and how to repair? Ask car question | repair. P1077 intake manifold runner control valve stuck short p1077 obd code description: The vehicle owner had been in several times with the same p1077 imcr (intake manifold control runner valve malfunction) dtc. This code was intermittently illuminating the mil every now. Engine power is achieved by closing and opening the intake manifold runner control (imrc) valve.
Obd2 code p1077 and the intake manifold. Common symptoms of obd2 code p1077. Recognizing the symptoms associated with p1077 can help you pinpoint the problem. Based on the information you provided, the code p1077 and p1078 refer to a problem with the intake manifold runner control system. As you have already replaced the gasket and runner.